JCB JZ140 Hydraulic Final Drive Motor

d:7.0000 in; Cg - Geometry Factor:0.13; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:37100 lbf; Design Units:Imperial; Series:470000; Ab - Cage-Cone Frontface Clearance:0.01 in; Aa - Cage-Cone Backface Clearance:0.51 in; da - Cone Frontface Backing Diameter:7.91 in; B - Cone Width:3.6250 i

B:23.8 mm; G:M6x1; Designation of bearing:ES206G2T20; J:121 mm; H:90 mm; Designation of open end cover:SCOE206-30; T max.:200 °C; Designation of housing:PH206N-; s1:27.8 mm; Designation of closed end cover:SCCE206;

Recommended tightening torque for set screw:11.5 Nm; A4:26 mm; Designation of closed end cover:SCC209; C0:20.8 kN; e:10 mm; C:31.85 kN; A1:10 mm; H3:105; Weight:2.54 kg; Dz:95 mm;

C0:86.5 kN; G:M10x1; B:86 mm; S:34 mm; s1:43 mm; e:38 mm; Designation of bearing:UC316G2; A1:32 mm; d:80 mm; T max.:100 °C;

Recommended tightening torque for set screw:8.3 Nm; A:48 mm; J:127 mm; s1:21.45 mm; L:167 mm; H1:19 mm; Designation of bearing:SUC207-23; C:20.1 kN; C0:15.6 kN; T min.:-20 °C;

Ab - Cage-Cone Frontface Clearance:0.26 in; C1 - Dynamic Radial Rating (1 million revolutions)6:197000 lbf; d:6.9375 in; B - Cone Width:2.3750 in; Design Units:Imperial; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:34900 lbf; Cone Part Number:EE780694; K - Factor8:1.46; Cage Type:Pin-Type;

T max.:100 °C; G:M6x1; B:65.1 mm; d:61.91 mm; Z:35.6 mm; s1:32.55 mm; A1:50.8 mm; Designation of bearing:UC212-39G2; N:18mm; A:79.4 mm;

Bearing Weight:8.3 Kg; R - Inner Ring To Clear Radius1:2.500 mm; C1(2) - Dynamic Radial Rating (Two-Rows):606000 N; Reference Thermal Speed Rating (Grease):2900; Superseded Part:22318CJW33C3SLA; Da - Outer Ring Backing Diameter:171.000 mm; Reference Thermal Speed Rating (Oil)7:3400; Y0 - ISO Factor4

D:100 mm; Dynamic load, C:30.5 kN; ra max:1 mm; rs min:1.1 mm; d:65 mm; Brand:NTN; Nlim (grease):6,500 rpm; da min:71.5 mm; Mass:0.42 kg; Fatigue limit load, Cu:1.15 kN;

Shaft Size:65 mm; Note:This product line wa; Bolt Size:2 x M16; Bearing - Housing - Seal UPC:013992099594; Pillow/Plummer Block Style:Split Cylindrical Ho; Support Type:Two-Bolt Plummer Blo; Dimension H2:7.1 in; Dimension H1:1.3 in; Bearing - Housing - Seal:LSM65BXHHTPS; Bearing Number:LSM65BX;

ra (max):2 mm; db (max):94 mm; Enclosure:Open; Inside Ring Outside Diameter:95.3 mm; Limiting Speed - Grease:4,000 rpm; Limiting Speed - Oil:5,000 rpm; ra1 (max):2 mm; db (min):90 mm; dd (min):104 mm; d:80 mm;

S:25.4 mm; Z:74.3 mm; B:65.1 mm; A:50 mm; Designation of housing:F213N-; C0:40 kN; L:187 mm; T max.:100 °C; J:149 mm; Recommended tightening torque for set screw:16.8 Nm;

G1 - Heat Generation Factor (Roller-Raceway):19.3; D:63.101 mm; Cup Part Number:2620; B:23.818 mm; Aa - Cage-Cone Backface Clearance:0.3 mm; K - Factor7:2.3; C - Cup Width:19.050 mm; Y - ISO Factor9:2.36; Da - Cup Frontface Backing Diameter:59.44 mm; C1 - Dynamic Radial Rating (1 million revolutions

Note:This product line wa; Shaft Size:2-11/16 in; Ca - Axial Load Rating:1708.53 lbf; Bearing Number:LSE211BR; Maximum Speed:3310 rpm; Dimension H:95 mm; Series Type:Light Series; Seal Type:High Temperature Pac; Support Type:Two-Bolt Plummer Blo; Bolt Size:2 x M20;

T min.:-20 °C; d:25.4 mm; C0:7.88 kN; N:12mm; B1:44.3 mm; e:10 mm; S:17.4 mm; G:M6x1; A:27 mm; C:14 kN;